This entry was posted on Thursday, February 4th, 2010 at 6:03 am and is filed under auto. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
February 4, 2010
Depth of the music is very important for all those who are all music enthusiasts. They also aim at giving a powerful music and equally good sound. So they are more interested in developing such a stereo. The high range of music is generally handled by the speakers at the rear decks, door panels and at the dash. A sub woofer is no substitute for a device which can handle lower ranges which also separate a audio system and stock system. As far as an audio professional is considered he can handle the job of installing sub woofer to your system. Even an individual can try doing it. But how to install a sub woofer in a factory stereo?
Depth and powerful sound are important for good quality of music. Speakers can be installed at various places inside the car like door panels, dash and rear decks. They enhance the sound effect for higher notes. But to enjoy lower tones adding a sub woofer to a factory stereo is the best choice. Let us see how to do that now.
First we look into list of things needed to complete this work. They are trim panel removal tool, speaker wires and Philips head screw driver. First we should remove the connection of ground cable with the battery of the car. Usually the negative lead of car battery connects the car frame. To do this we shall take the help of Philip head screw driver which loosens the clamp of the cable connected to the negative lead of the battery.
Then the amplifier position is located after which the manual is gone through for any kind of procedure to be followed. The woofer can be placed either in the cargo area at the rear back or the car’s trunk in the case of models like hatch backs or SUV. The speakers are then connected to the output corresponding to each input.
The speaker wires are then routed to the location where the sub woofer is present. The amplifiers may be either close by the sub woofer or even far from them. In such cases the wires are routed to the sub woofers through the carpet layer under the floor of the vehicle. Hiding of the wiring is very essential to give your car a highly professional look.
The other end of the speaker wires are then connected with the input sockets of the sub woofer correctly. Ensure that always positive is connected to positive input and negative with negative input of woofer
The positive wires are then connected to the positive terminal and in the same way the negative terminals connected with the negative wires. That is in general corresponding connections between sub woofer input and the speaker wires are made. At last a re connection is established between the vehicle battery’s negative lead post and the grounding cable. Then the cable clamps are fixed in its position and re installed using a Philips screw driver.
Knowing how to install a sub woofer in a factory stereo is of great importance in maintaining a car.
Learn more about Auto. Stop by Author Name’s site where you can find out all about Car stereo and what it can do for you.
read comments (0)